Amp Rack
Laying out the components on the amp rack: JL Audio 12" sub, Alpine amp for the fronts, and Rockford Fosgate amp for the sub.
Another shot of the layout; this one includes the distribution block to split the 4 gauge into 8 gauge for the individual amps.
Back to the sub box; it's wired up, caulked, and has brackets attached to anchor it in the trunk.
Detail of the 12 gauge subwoofer wiring and gold-plated connectors.
The stock trunk carpeting goes back in over the Dynamat.
Drilling the sub box to mount the amp rack.
With the amp rack in place, time to screw it down and wire everything up.
Trim panels line the edges of the amp rack to provide a finished look. The top panel also conceals a blue neon light which replaced the original trunk light.
The finished product, carpeted to match the rest of the trunk.
